
Some enterprising student at the University of Waterloo has made his own air conditioner using a fan, a large garbage can and some vinyl and copper tubing. The device works as follows:
Here's the basic setup. The garbage can is filled with ice water, which is then fed by gravity (a siphon) through the copper tubing coiled along the back of the fan. The hot air passing through the tubing warms the cold water, cooling the air. Waste warm water is then pumped outside.
The system will cool an average room to a comfortable level in approximately 15-20 minutes. Depending on flow rate, a full bucket of water will last approximately 1-3 hours. I use a single bucket before bed on hot nights, which lets me get to sleep. Once the water runs out, the house has cooled off enough that the fan alone provides sufficient cooling.
Recently, someone has posted instructions for making
improvements to the homemade air conditioner, which involves an aquarium pump to recycle the water, which in the first generation model, was routed outside the house.
Via
LifeHacker
Discuss | Permalink |